[quote=Andy_be]Looks like the mother board in a km 400 m2 v 1.0
does that help?
This is a link to ECS KM400 M2,
http://www.ecsusa.com/downloads/km400-m2.html but go to Device manager and check whether any yellow ! or red x shown, this will give idea of what the problem is. Check the board again to see if ECS is shown.Don't download BIOS update untill we know what is needed.
Right ckick MY Computer / Properties / Hardware Tab / Device manager
and this is what I need from Belarc
Operating system
Windows XP Home Edition Service Pack 2 (build 2600)
System Model
Hewlett-Packard Presario M2000 (EC217UA#ABL) Rev 1
System Serial Number: CNF5312S86
Enclosure Type: Notebook
Drives
40.00 Gigabytes Usable Hard Drive Capacity
21.84 Gigabytes Hard Drive Free Space
HL-DT-ST RW/DVD GCC-4244N [CD-ROM drive]
ST94019A [Hard drive] (40.01 GB) -- drive 0, s/n 3KW6KH46, rev 5.11, SMART Status: Healthy
Memory Modules c,d
224 Megabytes Installed Memory
Slot 'U5' is Empty
Slot 'U6' has 256 MB
Controllers Display
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
Standard Dual Channel PCI IDE Controller ATI RADEON XPRESS 200M [Display adapter]
Default Monitor
Digital Flat Panel (1024x768) [Monitor] (19.7"vis)
Generic Television [Monitor]
Bus Adapters Multimedia
Generic CardBus Controller
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller (2x) Conexant AC-Link Audio
Communications Other Devices
AC97 Data Fax SoftModem with SmartCP
The begging gives clues to what is installed
Hope this helps
