Quote:
|
Originally Posted by avirock
HI there this is my belarc profile
Operating System
Windows XP Professional (build 2600) Processor a 1.10 gigahertz Intel Pentium III
32 kilobyte primary memory cache
256 kilobyte secondary memory cache Drives 40.00 Gigabytes Usable Hard Drive Capacity
6.63 Gigabytes Hard Drive Free Space
FS_SCSI7 FS_CDAWDM_2000CD SCSI CdRom Device [CD-ROM drive]
MagicISO Virtual DVD-ROM0000 [CD-ROM drive]
SONY DVD RW DRU-820A [CD-ROM drive]
3.5" format removeable media [Floppy drive]
ST340810A [Hard drive] (40.02 GB) -- drive 0, s/n 3FB43466, rev 5.33, SMART Status: Healthy
Main Circuit Board b Board: i815E-ITE8870
Bus Clock: 100 megahertz
BIOS: Award Software International, Inc. 6.00 PG 07/17/2001 Memory Modules c,d 256 Megabytes Installed Memory
Slot 'A0' has 128 MB
Slot 'A1' has 64 MB
Slot 'A2' has 64 MB
Display Intel(r) 82815 Graphics Controller [Display adapter]
JEN JD166 [Monitor] (13.8"vis, s/n 8103DD006464, January 2001) Multimedia
Intel(r) 82801BA/BAM AC'97 Audio Controller
MPU-401 Compatible MIDI Device
Standard Game Port Communications Motorola SM56 PCI Fax Modem
and my porblem is that iam not getting good sound output . .. i think it is the problem with drivers.. can you help me in this matter plz.
|
Belarc is not giveing me the motherboard, try Everest
http://www.softpedia.com/get/System/...-Edition.shtml
post the report MyComputer/Summary and the Motherboard section
Also check this out
Check Control Panel / Sound & Audio Devices / Properties / Audio Tab / Sound Playback click on down arrow and check that the correct audio device is selected; something like modem line 0 playback might have been substituted for the proper audio device. Information by Jim Pivonka.
Hope this helps
