|
You have too large of a hard drive for win 98 . You must partition it. I think this will work in dos with FDISK and pick the %(percentage) I really don't know definitely haw large is too largs for win 98. If you go to the manufacturer's site and go to downloads. You can get a program to set up the new drive for win 98se and also copy the old c drive to your partition on your new drive and make it bootable. Then pwr down put your new drive as master or end of cable in master position (jumpered as CS). You will be able to set up old drive as CS in slave position and if your system runs fine, you can format it later and ust it as storage. Good Luck Lenny
|