[quote=andyacecandy]Operating System System Model
Windows XP Media Center Edition Service Pack 2 (build 2600) Hewlett-Packard Pavilion dv5000 (EP412UA#ABA) F.42
System Serial Number: CND6071SNR
Enclosure Type: Notebook
Processor a Main Circuit Board b
2.00 gigahertz AMD Turion 64
1024 kilobyte primary memory cache Board: Hewlett-Packard 30A4 49.55
Serial Number: CND6071SNR
BIOS: Hewlett-Packard F.42 06/21/2006
Drives Memory Modules c,d
99.81 Gigabytes Usable Hard Drive Capacity
53.19 Gigabytes Hard Drive Free Space
TSSTcorp CD/DVDW TS-L532M [CD-ROM drive]
ST9100822A [Hard drive] (100.03 GB) -- drive 0, s/n 3LG1QWKS, rev 3.02, SMART Status: Healthy 1024 Megabytes Installed Memory
Slot 'JP11' has 512 MB
Slot 'JP30' has 512 MB
Local Drive Volumes
c: (NTFS on drive 0) 99.81 GB 53.19 GB free
Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
Administrator 1/20/2006 3:49:56 PM (admin)
hp owner 8/8/2007 2:12:32 AM (admin)
local system accounts
ASPNET never
Guest never
HelpAssistant never
SUPPORT_388945a0 never
DISABLED Marks a disabled account; LOCKED OUT Marks a locked account
HP Photosmart 8200 Series on USB001
Microsoft Office Document Image Writer Driver on Microsoft Document Imaging Writer Port:
Controllers Display
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
Standard Dual Channel PCI IDE Controller ATI MOBILITY RADEON Xpress 200 Series [Display adapter]
Default Monitor
Generic Television [Monitor]
MS_ 19.7 [Monitor] (19.7"vis)
Bus Adapters Multimedia
Generic CardBus Controller
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller (2x) None detected
Communications Other Devices
1394 Net Adapter #2
Broadcom 802.11b/g WLAN
the audi driver is here
http://h10025.www1.hp.com/ewfrf/wc/s... 8479&lang=en
but look at this frm HP
Steps 4.5 and 7
http://h10025.www1.hp.com/ewfrf/wc/d...cname=bph07154
SET A SYSTEM RESTORE POINT BEFORE INSTALLING JUST IN CASE
Start / All Programs / Accessories / System Tools / System Restore / select Create a restore point and follow instructions