[quote=bulletproof99]the chip is built in heres my belarc results
Operating System System Model
Windows XP Home Edition Service Pack 2 (build 2600) Winfast 761GXK8MC 1.00
Enclosure Type: Desktop
Processor a Main Circuit Board b
1.60 gigahertz AMD Sempron
128 kilobyte primary memory cache
256 kilobyte secondary memory cache Board: Winfast 761GXK8MC 1.00
Serial Number: WYE662205262
Bus Clock: 200 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 10/11/2005
Drives Memory Modules c,d
80.02 Gigabytes Usable Hard Drive Capacity
74.80 Gigabytes Hard Drive Free Space
LITE-ON DVD C LH52C1P [CD-ROM drive]
3.5" format removeable media [Floppy drive]
WDC WD800JB-00JJC0 [Hard drive] (80.03 GB) -- drive 0, s/n WD-WCAM9S149796, rev 05.01C05, SMART Status: Healthy 1216 Megabytes Installed Memory
Slot 'A0' has 256 MB
Slot 'A1' has 1024 MB
Local Drive Volumes
c: (NTFS on drive 0) 80.02 GB 74.80 GB free
Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
Garrett 9/12/2007 12:21:28 AM (admin)
Me 9/11/2007 11:16:13 AM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account None detected
Controllers Display
Standard floppy disk controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
SiS PCI IDE Controller None detected
Bus Adapters Multimedia
SiS 7001 PCI to USB Open Host Controller (3x)
SiS PCI to USB Enhanced Host Controller None detected
Communications Other Devices
SiS 900-Based PCI Fast Ethernet Adapter
The Foxconn board has Realrek AC'97 go here
http://www.realtek.com.tw/downloads/...&GetDown=false
Download the (Executable file) save to desktop, double click downloaded file on desktop to install
Set a System Restore Point before installing drivers just in case
Start / All Programs / Accessories / System Tools / System Restore / select Create a restore point and follow instructions