|
On-board Realtek AC97 no sound a possible solution
Hi,
I went through all the steps here and still had no sound. Luckily this was a like for like replacement of a Gigabyte GA-7VT600 1394 mobo. I eventually spotted the problem. I found that none of the F_Audio jumpers were shorted and I discovered that this means that the sound is routed to the front case jack and my case doesn't have one. So I shorted out jumpers 1 and 3 in the mini-diagram below (one each side of the single pin) and it worked fine.
. . . . .
. . . .
12345
Sorry about the rubish diagram.
Clive
|