Quote:
|
Originally Posted by Cloud5109
Here is my Belarc Advisory Report
Operating System System Model
Windows XP Home Edition Service Pack 2 (build 2600) MICRO-STAR INTERNATIONAL CO., LTD MS-7142 1.00
Enclosure Type: Desktop
Processor a Main Circuit Board b
1.80 gigahertz AMD Sempron
128 kilobyte primary memory cache
128 kilobyte secondary memory cache Board: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 1.00
Bus Clock: 200 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 11/29/2005
Drives Memory Modules c,d
160.03 Gigabytes Usable Hard Drive Capacity
154.10 Gigabytes Hard Drive Free Space
COMBO 52X32X52X [CD-ROM drive]
3.5" format removeable media [Floppy drive]
ST3160815AS [Hard drive] (160.04 GB) -- drive 0 448 Megabytes Installed Memory
Slot 'A0' has 4096 MB
Slot 'A1' is Empty
Local Drive Volumes
c: (NTFS on drive 0) 160.03 GB 154.10 GB free
Network Drives
None detected
Controllers Display
Standard floppy disk controller
Primary IDE Channel [Controller] (2x)
Secondary IDE Channel [Controller] (2x)
Standard Dual Channel PCI IDE Controller
VIA Bus Master IDE Controller None detected
Bus Adapters Multimedia
VIA Rev 5 or later USB Universal Host Controller (4x)
VIA USB Enhanced Host Controller Unimodem Half-Duplex Audio Device
Vinyl AC'97 Codec Combo Driver (WDM)
Communications Other Devices
Smart Link 56K Voice Modem
USB Human Interface Device
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
HID-compliant mouse
USB Root Hub (5x)
|
Your drivers are here at MSI
http://asia.msi.com.tw/index.php?fun...=1&prod_no=173
Set a System Restore Point before installing drivers just in case
Start / All Programs / Accessories / System Tools / System Restore / select Create a restore point and follow instructions