Quote:
|
Originally Posted by bizzylizzy
Hi Also have a problem with a missing multimedia driver missing. My system is as follows:
System Model
Packard Bell NEC P842014001
System Serial Number: 034924320434
Chassis Serial Number: 50424E
Enclosure Type: Desktop
Operating System
Windows XP Home Edition Service Pack 3 (build 2600)
Install Language: English (United States)
System Locale: English (United Kingdom)
Processor
.70 gigahertz Intel Celeron
8 kilobyte primary memory cache
128 kilobyte secondary memory cache
Not hyper-threaded
Main Circuit Board
Board: NEC COMPUTERS INTERNATIONAL GA-8SIMLNF 1.0
Bus Clock: 100 megahertz
BIOS: American Megatrends Inc. 1.0y 01/31/2004
Drives
39.98 Gigabytes Usable Hard Drive Capacity
20.10 Gigabytes Hard Drive Free Space
HL-DT-ST CD-RW GCE-8483B [CD-ROM drive]
HL-DT-ST DVD-ROM GDR8162B [CD-ROM drive]
3.5" format removeable media [Floppy drive]
ST340810A [Hard drive] (40.02 GB) -- drive 0, s/n 5FB21NHM, rev 3.34, SMART Status: Healthy
USB Device [Hard drive] (2.02 GB) -- drive 1
Memory Modules
480 Megabytes Usable Installed Memory
Slot 'DDR2' has 256 MB
Slot 'DDR1' has 256 MB
Controllers
Standard floppy disk controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
SiS PCI IDE Controller
Bus Adapters
SiS 7001 PCI to USB Open Host Controller (2x)
SiS PCI to USB Enhanced Host Controller
Display
SiS 650 [Display adapter]
Packard Bell NEC CI FT500B [Monitor] (14.9"vis, s/n 100031933008, March 2004)
Communication
Aztech CNR2900 V.90 Modem
Realtek RTL8139 Family PCI Fast Ethernet NIC
Dhcp Server: 192.168.1.254
Physical Address: 00:0D:61:CE:97:AF
Networking Dns Server: 192.168.1.254
If anyone can help I would be most grateful
Thank you
|
drivers here at Packard Bell
http://support.packardbell.com/uk/it...2014001&g=2000
Set a System Restore Point before installing any drivers just in case
Start / All Programs / Accessories / System Tools / System Restore – click radio button Create a restore point and follow instructions