|
Yeh--My reaction to that article was about the same as yours--OK,
so what now? It was comforting to learn that at least somewhere out
there someone was obviously right on top of it.
I make no representations on this solution because every time I reinstall I forget to try it:
Fresh install with no ACPI.
Views: 37718 | Print Tweak | 8/12/2002
Just press F5 after the first screen asking
if you have raid devices to install (will ask at
bottom of screen to press F6) keep pressing F5 to second screen where it will ask to press F2 for recovery console. Keep holding F5 and should get another screen where it will say that it cannot recognize type of pc. There you have two choices: standard pc and other. Select standard and voila no ACPI will be installed.
The error is onviously very technical and thus it is possible that this solution may work.
|