Win 2000 Pro Driver installation

[Brulee]

I recently installed Win 2000 Pro and after rebooting, pictures are now garbled and blurred:I tried to scan a document and got the follwing message " Display needs to be set at 800x600, 32000; No sound when playing a music CD; I can hear modem dialing
I used the setup wizard and windows update,but no drivers were found.
Where can I find a free site to download drivers to correct these problems

[bookworm]

Originally Posted by Brulee

I recently installed Win 2000 Pro and after rebooting, pictures are now garbled and blurred:I tried to scan a document and got the follwing message " Display needs to be set at 800x600, 32000; No sound when playing a music CD; I can hear modem dialing
I used the setup wizard and windows update,but no drivers were found.
Where can I find a free site to download drivers to correct these problems

need more information, what make and model is your comp, what motherboard, intel or amd, if you can't find this information download Belarc Advisor and post the results, get belarc here http://www.belarc.com/free_download.html

Hope this helps

[Brulee]

Originally Posted by bookworm

need more information, what make and model is your comp, what motherboard, intel or amd, if you can't find this information download Belarc Advisor and post the results, get belarc here http://www.belarc.com/free_download.html

Hope this helps

Thanks for your reply. Here is system scan information from Belarc Advisor

Micron Millenium, 1000 mhz, Intel PIII, Bios: Phoenix Tech 6.00PG 04/19/04

[bookworm]

Originally Posted by Brulee

Thanks for your reply. Here is system scan information from Belarc Advisor

Micron Millenium, 1000 mhz, Intel PIII, Bios: Phoenix Tech 6.00PG 04/19/04

Windows XP Professional (build 2600) AOpen AX45-V
Processor a Main Circuit Board b
1.80 gigahertz Intel Pentium 4
8 kilobyte primary memory cache
256 kilobyte secondary memory cache Board: AOpen AX45-V
Bus Clock: 101 megahertz
BIOS: Award Software International, Inc. 6.00 PG 05/02/2002
Drives Memory Modules c,d
40.02 Gigabytes Usable Hard Drive Capacity
23.41 Gigabytes Hard Drive Free Space

This is what I need from Belarc, I need to recognise the Motherboard. This one is an AOpen AX45-V or the model, can't find anything under just Micro millenium.

Hope this helps

[Brulee]

Belarc Advisor PC Audit

Operating system
Windows 2000 Pro Service Pack 4 ( build 2195)
Processor
1000 megahertz Intel Pentium III
32 Kilobyte primary memory cache
256 Kilobyte secondary memory cache
Drives
80.02 Gigabytes Usable Hard Drive Capacity
62.99 Giga Hard Drive Free Space
WDC WD800BB- 00FJA0 [ Hard drive] (80.03 GB)
drive 0, s/n WD- WCAJ92577258,rev 13.03G13,
Smart Status: Healthy
Main Circuit Board
Bios: Phoenix Technologies 6.00PG 04/19/04
Memory Modules
480 Megabytes Installed Memory
Local Drive Volumes
cNTFS on drive 0) 80.02 GB 62.99 GB free
Network Drives
Non Detected
Display
Non Detected

[bookworm]

Originally Posted by Brulee

Belarc Advisor PC Audit

Operating system
Windows 2000 Pro Service Pack 4 ( build 2195)
Processor
1000 megahertz Intel Pentium III
32 Kilobyte primary memory cache
256 Kilobyte secondary memory cache
Drives
80.02 Gigabytes Usable Hard Drive Capacity
62.99 Giga Hard Drive Free Space
WDC WD800BB- 00FJA0 [ Hard drive] (80.03 GB)
drive 0, s/n WD- WCAJ92577258,rev 13.03G13,
Smart Status: Healthy
Main Circuit Board
Bios: Phoenix Technologies 6.00PG 04/19/04
Memory Modules
480 Megabytes Installed Memory
Local Drive Volumes
cNTFS on drive 0) 80.02 GB 62.99 GB free
Network Drives
Non Detected
Display
Non Detected

Ok it's giveing nothing away, but have found out that the company is mpc this is their site, http://support.mpccorp.com/index.html
now you need the serial number, it tells how to find it. If you wish PM me with the serial number and I'll try to track down the drivers you need.

Hope this helps