Please tell me what is my sound drive

[luckyvan]

Dear friend
can you tell me what is my sound device and please tell me the link that I can download my sound device. Thank in advance

Computer Profile Summary

Computer Name: Cto
Profile Date: Friday, February 10, 2006 1:06:41 PM
Advisor Version: 7.0t
Windows Logon: CTO


Click here for Belarc's System Management products, for large and small companies.


Operating System System Model
Windows XP Professional Service Pack 2 (build 2600) Enclosure Type: Desktop
Processor a Main Circuit Board b
400 megahertz Intel Celeron
32 kilobyte primary memory cache
128 kilobyte secondary memory cache Board: i440ZX-W977 (ZM6)
Bus Clock: 66 megahertz
BIOS: Award Software International, Inc. 4.51 PG 12/03/1999
Drives Memory Modules c,d
40.00 Gigabytes Usable Hard Drive Capacity
31.38 Gigabytes Hard Drive Free Space

MATSHITA CD-ROM CR-594
3.5" format removeable media [Floppy drive]

WDC WD400BB-23DEA0 [Hard drive] (40.02 GB) -- drive 0 192 Megabytes Installed Memory

Slot 'DIMM1' has 128 MB
Slot 'DIMM2' has 64 MB
Local Drive Volumes

c: (FAT32 on drive 0) 20.00 GB 11.57 GB free
d: (FAT32 on drive 0) 19.99 GB 19.81 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
CTO
2/10/2006 12:27:19 PM (admin)
Guest
1/21/2006 8:04:55 PM
local system accounts
Administrator
never (admin)
HelpAssistant
never
SUPPORT_388945a0 never
VUSR_CTO
never

Marks a disabled account; Marks a locked account AGFA-AccuSet v52.3 on LPT1:
Amyuni PDF Converter 2.07 on LPT1:

Controllers Display
Standard floppy disk controller
Intel(R) 82371AB/EB PCI Bus Master IDE Controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller] ATI Technologies, Inc. RAGE XL AGP 2X [Display adapter]
Fujitsu FMV-DP84Y4 [Monitor] (13.8"vis, November 1996)
Bus Adapters Multimedia
Intel(R) 82371AB/EB PCI to USB Universal Host Controller None detected
Communications Other Devices
None detected PC/AT Enhanced PS/2 Keyboard (101/102-Key)
Microsoft PS/2 Mouse
NT Apm/Legacy Interface Node
USB Root Hub
Virus Protection [Back to Top]

Symantec AntiVirus Corporate Edition Version 10.0.0.359
Scan Engine Version 103.0.2.7
Virus Definitions Version 4/11/2005 Rev 23
Last Disk Scan on Friday, February 10, 2006 12:29:11 PM
Realtime File Scanning On

Missing Microsoft Security Hotfixes [Back to Top]

These required security hotfixes (using the 01/10/2006 Microsoft Security Bulletin Summary) were not found installed. Note: CIS benchmarks require that Critical and Important severity security hotfixes must be installed.
Q281297 - Unrated (details...)

Q816093 - Critical (details...)

Q873339 - Important (details...)

Q885250 - Critical (details...)

Q885835 - Important (details...)

Q885836 - Important (details...)

Q888113 - Important (details...)

Q888302 - Important (details...)

Q890046 - Moderate (details...)

Q890859 - Important (details...)

Q891781 - Important (details...)

Q893066 - Critical (details...)

Q893756 - Important (details...)

Q896358 - Critical (details...)

Q896422 - Critical (details...)

Q896423 - Moderate (details...)

Q896424 - Critical (details...)

Q896428 - Moderate (details...)

Q899587 - Moderate (details...)

Q899589 - Important (details...)

Q899591 - Moderate (details...)

Q900725 - Important (details...)

Q901017 - Important (details...)

Q901214 - Critical (details...)

Q902400 - Important (details...)

Q904706 - Critical (details...)

Q905414 - Low (details...)

Q905749 - Important (details...)

Q905915 - Critical (details...)

Q908519 - Critical (details...)

Q912919 - Critical (details...)


Installed Microsoft Hotfixes [Back to Top]

Internet Explorer
SP2
(SP2)
No details available


Click here to see all available Microsoft security hotfixes for this computer.

Marks a security hotfix (using the 01/10/2006 Microsoft Security Bulletin Summary)

Marks a hotfix that verifies correctly

Marks a hotfix that fails verification (note that failing hotfixes need to be reinstalled)
Unmarked hotfixes lack the data to allow verification


Click here for Belarc's System Management products, for large and small companies.


Software Licenses [Back to Top]


Adobe - Photoshop 104502033247221735666177
Adobe Systems, Inc. - Adobe Photoshop 7.0 10450203324722173566XXXX
Belarc - Advisor 87c5d3a6
Microsoft - Internet Explorer 55274-643-7213323-23517 (Key: XP8BF-F8HPF-PY6BX-K24PJ-TWT6M)
Microsoft - Office XP Professional with FrontPage 54185-640-0000025-17774 (Key: FM9FY-TMF7Q-KCKCT-V9T29-TBBBG)
Microsoft - Visual Studio 6.0 Enterprise Edition 50021-111-1111111-80685
Microsoft - WebFldrs XP 12345-111-1111111-31312
Microsoft - Windows XP Professional 55274-643-7213323-23517 (Key: XP8BF-F8HPF-PY6BX-K24PJ-TWT6M)

Software Versions (mouse over * for details, click * for location) [Back to Top]

Adobe ImageReady (tm) 7.0 Version 7.0 *
Adobe Photoshop Version 7.0 *
Adobe Systems, Inc. Adobe Gamma Loader Version 1, 0, 0, 1 *
Apple Computer, Inc. - QuickTime QuickTime 6.0 *
Belarc, Inc. - Advisor Version 7.0t *
Cinematronics - 3D Pinball Version 5.1.2600.2180 *
Create Timer Install Disks *
CTO For you!!! Version 1.00 *
CyberLink Corp. - PowerDVD Version 4.0.1015 *
Dictionary 2000 4.0 *
English Khmer Dictionary *
Indigo Rose Corporation - Setup Factory 5.0 Uninstaller Version 5.0.0.4 *
Inno Setup Version 51.42.0.0 *
InstallShield unInstaller Version 2.20.920.0 *
Intuit, Inc. - QuickBooks for Windows Version 12.0D R1 *
Intuit, Inc. - QuickBooks Version 12.0 R1 *
LynoCreations - Lyno KhmerTyping Demo Version 1.00 *
Macromedia Dreamweaver 8 Version 8.0.0.2734 *
Macromedia Extension Manager Version 1.7.240 *
Macromedia Flash Version 8, 0, 0, 478 *
Macromedia, Inc. - Flash 8 Video Encoder Version 1.0.0.136 *
Macromedia, Inc. - Shockwave Flash Version 8,0,22,0 *
Microsoft (R) Developer Studio Version 6.00.8159 *
Microsoft (R) Visual C++ Version 6.0.000 *
Microsoft (R) Visual Studio Version 6.0.000 *
Microsoft (R) Visual Studio Version 6.00.8168.2 *
Microsoft (r) Windows Script Host Version 5.6.0.8820 *
Microsoft - PDMan98 Version 6.00.8169 *
Microsoft Application Error Reporting Version 10.0.2609 *
Microsoft Clip Organizer Version 10.0.2625 *
Microsoft Corporation - ???????? 2002a Version 5.2.2801 *
Microsoft Corporation - Application Performance Explorer Manager Version 6.00.8169 *
Microsoft Corporation - Dependency Walker Version 1.0 *
Microsoft Corporation - Encarta Version 14.0.0.0603 *
Microsoft Corporation - Help Workshop Version 4.03.0002 *
Microsoft Corporation - Internet Explorer Version 6.00.2900.2180 *
Microsoft Corporation - Messenger Version 4.7.3000 *
Microsoft Corporation - OLEViewer Version 2.1 *
Microsoft Corporation - VB 6 API Declaration Loader Version 6.00.8169 *
Microsoft Corporation - Visual Basic Version 6.00.8176 *
Microsoft Corporation - Windows Installer - Unicode Version 3.0.3790.2180 *
Microsoft Corporation - Windows Movie Maker Version 2.1.4026.0 *
Microsoft Corporation - Windows® NetMeeting® Version 3.01 *
Microsoft Corporation - Zone.com Version 1.2.626.1 *
Microsoft Data Access Components Version 3.525.1117.0 *
Microsoft Development Environment Version 6.00.8167 *
Microsoft Development Environment Version 7.00.9064.9150 *
Microsoft IME 2002 Version 8.1.4202.0 *
Microsoft Korean IME 2002 Version 6.1.2600.0 *
Microsoft Object Linking and Embedding Client Test for Windows Version 1.01.000 *
Microsoft Object Linking and Embedding Server Test for Windows Version 1.01.000 *
Microsoft Office Document Imaging Version 1.03.2349.1 *
Microsoft Office Save My Settings/Profile Wizard Version 10.0.2609 *
Microsoft Office XP Version 10.0.2627 *
Microsoft Outlook Version 10.0.2627 *
Microsoft Photo Editor Version 10.0 *
Microsoft SourceSafe Version 06.00.0000 *
Microsoft Windows Media Player Version 6.4.09.1125 *
Microsoft(R) Windows Media Player Version 9.00.00.3250 *
Microsoft® Developer Studio Version 6.0.000 *
Microsoft® Developer Studio Version 6.00.00 *
Microsoft® Internet Services Version 6.1.33.0 *
Microsoft® Query Version 8.00.3308 *
Microsoft® Schedule+ for Windows 95(TM) Version 7.5 *
Microsoft® Visual FoxPro® Version 6.0.8167.0 *
Microsoft® Windows Media Services Version 4.1.00.3917 *
MindVision - Installer VISE 2.8.3 Version 2.8.3 *
MSPY2002 *
Nullsoft - Winamp Version 2.72 *
Orkida Dictionary *
Pocket Oxford Dictionary *
Rational Software Corporation - Visual Modeler Version 2.0 *
Symantec AntiVirus Version 10.0.0.359 *
Symantec Corporation - Client and Host Security Platform Version 103.5.1.9 *
Symantec Corporation - SPBBC Version 1,5,1,3 *
Symantec SAVRoam Version 10.0.0.359 *
Symantec Security Drivers Version 5.5 *
UpdateIPR.exe *
URSoft,Inc - Your Uninstaller! 2004 Version 5.0.0 *

________________________________________
________________________________________

[luckyvan]

Originally Posted by oldtimer

Well you could use a little more memory for this system.
But wherever you got it should have included all the necessary disks and manuals.All the info needed is Sound card or internal sound name.
Not that long list.

Hello , my brother tell me that my sound card is :
Creative AudioPCI( ES1371,ES1373)(WDM)
Device type: Sound, Video and game controllers
Manufacturer: Creative Technology Ltd.
Location: PCI Slot 2 (PCI bus 0, device 13, function 0)

[bookworm]

Originally Posted by luckyvan

Hello , my brother tell me that my sound card is :
Creative AudioPCI( ES1371,ES1373)(WDM)
Device type: Sound, Video and game controllers
Manufacturer: Creative Technology Ltd.
Location: PCI Slot 2 (PCI bus 0, device 13, function 0)

Set a System Restore Point before installing driver just in case

Then go here to Creative and download the Ensonic Audio PCI

http://uk.europe.creative.com/suppor...pe=1&x=29&y=10


Hope this helps

[luckyvan]

Originally Posted by bookworm

Set a System Restore Point before installing driver just in case

Then go here to Creative and download the Ensonic Audio PCI

http://uk.europe.creative.com/suppor...pe=1&x=29&y=10


Hope this helps

Thanks you for reply me.I just follow your link that you give me and download that drive.It is not support with my sound card because when I install it, there is a message that"Setup could not detect any sound Blaster Audio Card on your system please ensure that your sound Blaster hardware is properly installed before running this setup program. Setup will now exit." Please help me with another link!

[luckyvan]

Originally Posted by oldtimer

Don't you have a Creative cd and install booklet ?

It's all there and necessary.I have never heard of this model.
Or them named that way.
But if you go to Creative,follow the ID steps for your card.
Get a PDF manual while your at it.

Hello I don't have Creative CD this why I want to download the driver.You said you never heard of this model, me also this why I ask you. You know! the way that my brother got information above is right click on My computer>manage>Device manage>sound Video.. and then right click on the sound driver and property.This is the way to see the model of sound drive????????????????????????

[bookworm]

Originally Posted by luckyvan

Thanks you for reply me.I just follow your link that you give me and download that drive.It is not support with my sound card because when I install it, there is a message that"Setup could not detect any sound Blaster Audio Card on your system please ensure that your sound Blaster hardware is properly installed before running this setup program. Setup will now exit." Please help me with another link!

Try this one from DriverGuide, read notes at bottom, it is a zip file http://members.driverguide.com/drive...riverid=120560

Hope this helps

[luckyvan]

Originally Posted by bookworm

Try this one from DriverGuide, read notes at bottom, it is a zip file http://members.driverguide.com/drive...riverid=120560

Hope this helps

Hi!
I had followed the link that you give me and download that drive.
It came with Zip folder and I have to extract it but when I extracted
and looked for setup file, there isn’t. So I go to my sound drive(Creative AudioPCI(ES1371,ES1373(WDM)) then update it by use the files that I
downloaded (Tell me if this way is right or wrong). After that I got
SB PCI (WDM) and I had to restart My computer.The computer
restart normally and then stop responsible when windows boot(The
small ball under words "Windows WP" stop running. I also waited it
if it runs again but nothing happen).I restarted again. Then I got
the following message "We apologize for the inconvenience, but
Windows did not start successfully. A recent hardware or software
Change might have caused this. If your computer stopped responding,
restarted unexpectedly, or was automatically shutdown to protect your files and folders, choose Last Know Good Configuration to revert to the most recent setting that worked. If a previous startup attempt was interrupted due to a power failure or because the power or reset button was pressed or if you aren't sure that caused the problem, choose start Windows Normally.
Safe mode
Safe mode with networking
Safe mode with commend prompt
Last know good configuration (your most recen setting that worked)
Start windows normally"
I chose "Last know good configuration" but I still couldn't start my computer. For second time I chose "safe mode”, windows could start. I don't know how to do with this problem. It comes from the drive that I just install or not? But you know, before I had this problem also but when I chose"Last know good configuration" I could start my computer. Now I want you to help me with this new problem. For the sound problem, it don't solve yet because windows couldn’t start normally. Please help me step by step because I'm just 15 years old and I haven't so must experience in computer. If you want more
information, I'm please to reply.Thanks you very mush for your answer.

[bookworm]

Originally Posted by luckyvan

Hi!
I had followed the link that you give me and download that drive.
It came with Zip folder and I have to extract it but when I extracted
and looked for setup file, there isn’t. So I go to my sound drive(Creative AudioPCI(ES1371,ES1373(WDM)) then update it by use the files that I
downloaded (Tell me if this way is right or wrong). After that I got
SB PCI (WDM) and I had to restart My computer.The computer
restart normally and then stop responsible when windows boot(The
small ball under words "Windows WP" stop running. I also waited it
if it runs again but nothing happen).I restarted again. Then I got
the following message "We apologize for the inconvenience, but
Windows did not start successfully. A recent hardware or software
Change might have caused this. If your computer stopped responding,
restarted unexpectedly, or was automatically shutdown to protect your files and folders, choose Last Know Good Configuration to revert to the most recent setting that worked. If a previous startup attempt was interrupted due to a power failure or because the power or reset button was pressed or if you aren't sure that caused the problem, choose start Windows Normally.
Safe mode
Safe mode with networking
Safe mode with commend prompt
Last know good configuration (your most recen setting that worked)
Start windows normally"
I chose "Last know good configuration" but I still couldn't start my computer. For second time I chose "safe mode”, windows could start. I don't know how to do with this problem. It comes from the drive that I just install or not? But you know, before I had this problem also but when I chose"Last know good configuration" I could start my computer. Now I want you to help me with this new problem. For the sound problem, it don't solve yet because windows couldn’t start normally. Please help me step by step because I'm just 15 years old and I haven't so must experience in computer. If you want more
information, I'm please to reply.Thanks you very mush for your answer.

Start your computer in Safe Mode then follow this path

Start / All Programes / Accessories / System Tools / System Restore / click Restore my computer to an earlier time / Next / on the Calender choose an earlier date that is in a darker blue / on the right click the restore point you set before installing the driver, if you did not set a restore point click System Checkpoint / Next. The computer will shutdown and then restart to the earlier date


let me know if you need more help

Cheers

[luckyvan]

Originally Posted by bookworm

Start your computer in Safe Mode then follow this path

Start / All Programes / Accessories / System Tools / System Restore / click Restore my computer to an earlier time / Next / on the Calender choose an earlier date that is in a darker blue / on the right click the restore point you set before installing the driver, if you did not set a restore point click System Checkpoint / Next. The computer will shutdown and then restart to the earlier date


let me know if you need more help

Cheers

Hi!
I did like you said but my computer still stop responsible.How can I do now?

[luckyvan]

Originally Posted by oldtimer

http://i6.photobucket.com/albums/y22...OUNDCARDID.jpg



The above is where you find the name of it.
Mine is Audigy 2 as you can see.Run sysdm to get there .

Yes! It there that I find my sound card name.

[bookworm]

Originally Posted by luckyvan

Hi!
I did like you said but my computer still stop responsible.How can I do now?

Is the computer still not starting, if so Start in Safe Mode and roll back the driver see here on how to

Default How to rollback a device driver
There are times when you install an ungrade to a device driver but instead of getting an upgrade you get downgraded in the sense that either you loose on performance or its stoping functioning at all. In situation like this where you are still able to logon with System priviledges, you can roll back the driver.
Here are the steps:

1. Log in with an administrator account
2. Right click on My Computer
3. Select Properties
4. Click on the Hardware tab
5. Click on the Device Manager button
6. Select the device you want to rollback or reconfigure
7. Click on the Driver tab and then click on the Roll Back Drive button

Hope this helps

[luckyvan]

Originally Posted by bookworm

Is the computer still not starting, if so Start in Safe Mode and roll back the driver see here on how to

Default How to rollback a device driver
There are times when you install an ungrade to a device driver but instead of getting an upgrade you get downgraded in the sense that either you loose on performance or its stoping functioning at all. In situation like this where you are still able to logon with System priviledges, you can roll back the driver.
Here are the steps:

1. Log in with an administrator account
2. Right click on My Computer
3. Select Properties
4. Click on the Hardware tab
5. Click on the Device Manager button
6. Select the device you want to rollback or reconfigure
7. Click on the Driver tab and then click on the Roll Back Drive button

Hope this helps

Thanks you for your reply.Now my computer could start normally
but not very good.You wanted me to roll back the driver but before
I already restored my driver to Creative AudioPCI(ES1371,ES1373)(WDM)
so when I roll back the driver it said that no backup driver to restore.
In this case, I tried to uninstall my driver and after that I restarted
my computer.The computer could start but when I opened my document
the computer stop responsible.I restarted again.The computer could
start.I received the error message that I have to send to microsoft.
It is that"The system has recovered from a serious error.A log of this
error has been created.Please tell Microsoft about this problem. We have
created an error report that you can send to help us inprove Microsoft
Windows. We will treat this report as confidential and anymous.To see
what data this error report contains.Click here.Send Error Report.Don't
sent."I want to send this error report to Microsoft but my computer
don't connect with Internet.I also want to send this error report to you
but I can't attach file with my post.So can you tell me How can I do
to sent this error report to Microsoft if my computer do have internet
connection and can you tell me your email addresse that I will can sent
this error report to you also? You know I also have one more problem.
When I was working with my computer, windows automatically shutdow.
Before it shutdow, the sreen come blue with message that"A problem
has been created and windows has to studows to prevent demage to your
computer.If it is the first time you have seen.......?????" I couldn't
see all because because it is very fast.Please help me with this error!

[luckyvan]

Originally Posted by bookworm

Is the computer still not starting, if so Start in Safe Mode and roll back the driver see here on how to

Default How to rollback a device driver
There are times when you install an ungrade to a device driver but instead of getting an upgrade you get downgraded in the sense that either you loose on performance or its stoping functioning at all. In situation like this where you are still able to logon with System priviledges, you can roll back the driver.
Here are the steps:

1. Log in with an administrator account
2. Right click on My Computer
3. Select Properties
4. Click on the Hardware tab
5. Click on the Device Manager button
6. Select the device you want to rollback or reconfigure
7. Click on the Driver tab and then click on the Roll Back Drive button

Hope this helps

Hi!
You haven't replied me.I think you may be busy.In the time that you don't
reply me, I try to do something by myself.Last time I said you that when I
turn on my computer, it always auto shut down when I try to work with it and
before it shut down there is an message.I always try to look to that
message untill I know that It want me to diable my sound driver.Last time,I told
you that I unistall my sound driver but when I restart my computer, it
always detect and then install for me.So now when I diable my sound driver,
my computer can start normally and it don't shut down like before.I'm happy
now but I'm also sad because because I can't hear the sound from my computer.
Can you help me?I want my computer works normally and also hear the sound!!
Thanks you in advance.

[bookworm]

Originally Posted by luckyvan

Hi!
You haven't replied me.I think you may be busy.In the time that you don't
reply me, I try to do something by myself.Last time I said you that when I
turn on my computer, it always auto shut down when I try to work with it and
before it shut down there is an message.I always try to look to that
message untill I know that It want me to diable my sound driver.Last time,I told
you that I unistall my sound driver but when I restart my computer, it
always detect and then install for me.So now when I diable my sound driver,
my computer can start normally and it don't shut down like before.I'm happy
now but I'm also sad because because I can't hear the sound from my computer.
Can you help me?I want my computer works normally and also hear the sound!!
Thanks you in advance.

Sent you a private message yesterday, can you tell me the make and model of your computer, is it for example a Dell, Compac ,Medion look over the tower and see if you can find a sticker or label and let me know what it says.

Cheers

[luckyvan]

Originally Posted by bookworm

Sent you a private message yesterday, can you tell me the make and model of your computer, is it for example a Dell, Compac ,Medion look over the tower and see if you can find a sticker or label and let me know what it says.

Cheers

Hi!
My computer is:
Intel Celeron processor
401 MHz, 192MB of RAM
System:
Microsoft Windows XP
Professional
Version 2002
Service Pack 2

The following is the information that I see on sound card:

Creative ES1373
1373-0001-04
S JB053
S 9951H

A57211120 AudioPCI 0010
ASSYNO : 04 REV :A
ASSEMBLED IN SINGAPORE
SERIAL Nº:

MODEL : CT58ø3

©COPYRIGHT CREATIVE TECHNOLOGY LTD.

Tested To Somply with FCC standards for Home or Office use

I hope that all above informations will help you to find easily what
sound driver that comportable with my computer.I think I will
download the right driver in future.Thanks you for help me and
I'm glad to receive your answer.