ACPI Uniprocessor PC ethernet drivers

[jesslev]

I need to find the ACPI Uniprocessor PC ethernet drivers for my motherboard. Problem is I don't have the disk and my computer is home made. Does anyone know where I can download this?

[bookworm]

Originally Posted by jesslev

I need to find the ACPI Uniprocessor PC ethernet drivers for my motherboard. Problem is I don't have the disk and my computer is home made. Does anyone know where I can download this?

get Belarc http://www.belarc.com/free_download.html
copy and paste the report, it should give the motherboard, and from there the ethernet driver download

Hope this helps

[jaymze]

Dear Bookworm,

Before i re-install Windows XP Pro on my computer i was wondering whether you could direct me to any links which will provide me with a full "Drivers" list for my computer (such as Sound & Audio driver, Wireless internet, etc... The only problem is, that my computer is home made and im not too sure on all of the specs. See below for the Belarc information:

Operating System System Model
Windows XP Professional Service Pack 2 (build 2600) Intel Corporation
Processor a Main Circuit Board b
2.67 gigahertz Intel Pentium 4
8 kilobyte primary memory cache
512 kilobyte secondary memory cache Board: Intel Corporation D865PERL AAC27648-207
Serial Number: BTRL33014562
Bus Clock: 133 megahertz
BIOS: Intel Corp. RL86510A.86A.0052.P06.0305020834 05/02/2003
Drives Memory Modules c,d
120.02 Gigabytes Usable Hard Drive Capacity
111.91 Gigabytes Hard Drive Free Space

ASUS CRW-5224A [CD-ROM drive]
PIONEER DVD-ROM DVD-121 [CD-ROM drive]
3.5" format removeable media [Floppy drive]

WDC WD1200JB-32EVA0 [Hard drive] (120.03 GB) -- drive 0, s/n WD-WMAEL1358448, rev 15.05R15, SMART Status: Healthy 512 Megabytes Installed Memory

Slot 'J5G1' has 512 MB
Slot 'J5G2' is Empty
Slot 'J5H1' is Empty
Slot 'J5H2' is Empty
Local Drive Volumes

c: (NTFS on drive 0) 120.02 GB 111.91 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
Elia 2/5/2008 8:33:10 PM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never


Marks a disabled account; Marks a locked account Microsoft Office Document Image Writer Driver on Microsoft Document Imaging Writer Port:

Controllers Display
Standard floppy disk controller
Intel(R) 82801EB Ultra ATA Storage Controllers - 24D1
Intel(R) 82801EB Ultra ATA Storage Controllers - 24DB
Primary IDE Channel [Controller] (2x)
Secondary IDE Channel [Controller] (2x) RADEON 9200 SE Family (Microsoft Corporation) [Display adapter]
RADEON 9200 SE SEC Family (Microsoft Corporation) [Display adapter]
BenQ FP791 [Monitor] (17.1"vis, May 2003)
BenQ FP91G [Monitor] (19.1"vis, August 2005)
Bus Adapters Multimedia
Intel(R) 82801EB USB Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller - 24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD SoundMAX Integrated Digital Audio
Communications Other Devices

WLAN USB Adapter (AR)
primary Auto IP Address: 192.168.2.5 / 24
Gateway: 192.168.2.1
Dhcp Server: 192.168.2.1
Physical Address: 00:40:F4:80:A1:13

Networking Dns Servers: 192.168.2.1
198.142.0.51
203.2.75.132
HID-compliant consumer control device
USB Human Interface Device
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
HID-compliant mouse
USB Root Hub (5x)


Thanks,

Jaymze

[bookworm]

Originally Posted by jaymze

Dear Bookworm,

Before i re-install Windows XP Pro on my computer i was wondering whether you could direct me to any links which will provide me with a full "Drivers" list for my computer (such as Sound & Audio driver, Wireless internet, etc... The only problem is, that my computer is home made and im not too sure on all of the specs. See below for the Belarc information:

Operating System System Model
Windows XP Professional Service Pack 2 (build 2600) Intel Corporation
Processor a Main Circuit Board b
2.67 gigahertz Intel Pentium 4
8 kilobyte primary memory cache
512 kilobyte secondary memory cache Board: Intel Corporation D865PERL AAC27648-207
Serial Number: BTRL33014562
Bus Clock: 133 megahertz
BIOS: Intel Corp. RL86510A.86A.0052.P06.0305020834 05/02/2003
Drives Memory Modules c,d
120.02 Gigabytes Usable Hard Drive Capacity
111.91 Gigabytes Hard Drive Free Space

ASUS CRW-5224A [CD-ROM drive]
PIONEER DVD-ROM DVD-121 [CD-ROM drive]
3.5" format removeable media [Floppy drive]

WDC WD1200JB-32EVA0 [Hard drive] (120.03 GB) -- drive 0, s/n WD-WMAEL1358448, rev 15.05R15, SMART Status: Healthy 512 Megabytes Installed Memory

Slot 'J5G1' has 512 MB
Slot 'J5G2' is Empty
Slot 'J5H1' is Empty
Slot 'J5H2' is Empty
Local Drive Volumes

c: (NTFS on drive 0) 120.02 GB 111.91 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
Elia 2/5/2008 8:33:10 PM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never


Marks a disabled account; Marks a locked account Microsoft Office Document Image Writer Driver on Microsoft Document Imaging Writer Port:

Controllers Display
Standard floppy disk controller
Intel(R) 82801EB Ultra ATA Storage Controllers - 24D1
Intel(R) 82801EB Ultra ATA Storage Controllers - 24DB
Primary IDE Channel [Controller] (2x)
Secondary IDE Channel [Controller] (2x) RADEON 9200 SE Family (Microsoft Corporation) [Display adapter]
RADEON 9200 SE SEC Family (Microsoft Corporation) [Display adapter]
BenQ FP791 [Monitor] (17.1"vis, May 2003)
BenQ FP91G [Monitor] (19.1"vis, August 2005)
Bus Adapters Multimedia
Intel(R) 82801EB USB Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller - 24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD SoundMAX Integrated Digital Audio
Communications Other Devices

WLAN USB Adapter (AR)

HID-compliant consumer control device
USB Human Interface Device
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
HID-compliant mouse
USB Root Hub (5x)


Thanks,

Jaymze

These are the drivers for your Intel board
http://downloadcenter.intel.com/filt...4&submit=Go%21

Set a System Restore Point before installing drivers just in case
Start / All Programs / Accessories / System Tools / System Restore / select Create a restore point and follow instructions

[locolobo41]

I have a pc that I cannot get to connect on line. I tried downloading the Belarc Advisor but my computer wouldn't download it because it said it contained a virus or spyware. I am at my wits end.....

[bookworm]

Originally Posted by locolobo41

I have a pc that I cannot get to connect on line. I tried downloading the Belarc Advisor but my computer wouldn't download it because it said it contained a virus or spyware. I am at my wits end.....

Belarc is safe, so I suspect something is blocking your downloads, have you run a virus and spyware check on your comp?

[bookworm]

Originally Posted by locolobo41

I have a pc that I cannot get to connect on line. I tried downloading the Belarc Advisor but my computer wouldn't download it because it said it contained a virus or spyware. I am at my wits end.....

pop the side of the comp off and look at the board, post the name it gives - will look something like this
http://www.overclockeddoc.com/bookwo...otherboard.JPG

[blind1062002]

i just reformatted my computer and i cant connect to the internet, what drivers do i need? Here's my info

Operating System System Model
Windows XP Professional Service Pack 2 (build 2600) Enclosure Type: Desktop
Processor a Main Circuit Board b
1.30 gigahertz AMD Duron
128 kilobyte primary memory cache
64 kilobyte secondary memory cache Board: Gigabyte Technology Co., Ltd. 7VKMP 1.x
Bus Clock: 100 megahertz
BIOS: American Megatrends Inc. 07.00T 04/02/2003
Drives Memory Modules c,d
41.10 Gigabytes Usable Hard Drive Capacity
33.53 Gigabytes Hard Drive Free Space

PLEXTOR DVDR PX-716A [CD-ROM drive]

Generic USB CF Reader USB Device [Hard drive] -- drive 2
Generic USB MS Reader USB Device [Hard drive] -- drive 4
Generic USB SD Reader USB Device [Hard drive] -- drive 1
Generic USB SM Reader USB Device [Hard drive] -- drive 3
Maxtor 6E040L0 [Hard drive] (41.11 GB) -- drive 0, s/n E1F7A46E, rev NAR61590, SMART Status: Healthy 480 Megabytes Installed Memory

Slot '0' has 256 MB
Slot '1' has 256 MB
Local Drive Volumes

c: (NTFS on drive 0) 41.10 GB 33.53 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
Administrator 12/26/2008 7:04:38 AM (admin)
local system accounts
Guest never
HelpAssistant never
SUPPORT_388945a0 never


Marks a disabled account; Marks a locked account None detected
Controllers Display
Standard floppy disk controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
VIA Bus Master IDE Controller S3 Graphics ProSavageDDR (Microsoft Corporation) [Display adapter]
COMPAQ FS7600 [Monitor] (15.7"vis, s/n CNC50511X8, January 2005)
Bus Adapters Multimedia
VIA Rev 5 or later USB Universal Host Controller (3x)
VIA USB Enhanced Host Controller MPU-401 Compatible MIDI Device
Standard Game Port
Communications Other Devices
SoftV92 Data Fax Modem


Realtek RTL8139 Family PCI Fast Ethernet NIC
Dhcp Server: none responded
Physical Address: 00:0D:61:06:4B:74
USB Human Interface Device
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
HID-compliant mouse
USB Mass Storage Device
USB Root Hub (4x)

[bookworm]

Originally Posted by blind1062002

i just reformatted my computer and i cant connect to the internet, what drivers do i need? Here's my info

Operating System System Model
Windows XP Professional Service Pack 2 (build 2600) Enclosure Type: Desktop
Processor a Main Circuit Board b
1.30 gigahertz AMD Duron
128 kilobyte primary memory cache
64 kilobyte secondary memory cache Board: Gigabyte Technology Co., Ltd. 7VKMP 1.x
Bus Clock: 100 megahertz
BIOS: American Megatrends Inc. 07.00T 04/02/2003
Drives Memory Modules c,d
41.10 Gigabytes Usable Hard Drive Capacity
33.53 Gigabytes Hard Drive Free Space

PLEXTOR DVDR PX-716A [CD-ROM drive]

Generic USB CF Reader USB Device [Hard drive] -- drive 2
Generic USB MS Reader USB Device [Hard drive] -- drive 4
Generic USB SD Reader USB Device [Hard drive] -- drive 1
Generic USB SM Reader USB Device [Hard drive] -- drive 3
Maxtor 6E040L0 [Hard drive] (41.11 GB) -- drive 0, s/n E1F7A46E, rev NAR61590, SMART Status: Healthy 480 Megabytes Installed Memory

Slot '0' has 256 MB
Slot '1' has 256 MB
Local Drive Volumes

c: (NTFS on drive 0) 41.10 GB 33.53 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
Administrator 12/26/2008 7:04:38 AM (admin)
local system accounts
Guest never
HelpAssistant never
SUPPORT_388945a0 never


Marks a disabled account; Marks a locked account None detected
Controllers Display
Standard floppy disk controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
VIA Bus Master IDE Controller S3 Graphics ProSavageDDR (Microsoft Corporation) [Display adapter]
COMPAQ FS7600 [Monitor] (15.7"vis, s/n CNC50511X8, January 2005)
Bus Adapters Multimedia
VIA Rev 5 or later USB Universal Host Controller (3x)
VIA USB Enhanced Host Controller MPU-401 Compatible MIDI Device
Standard Game Port
Communications Other Devices
SoftV92 Data Fax Modem


Realtek RTL8139 Family PCI Fast Ethernet NIC
Dhcp Server: none responded
Physical Address: 00:0D:61:06:4B:74
USB Human Interface Device
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
HID-compliant mouse
USB Mass Storage Device
USB Root Hub (4x)

it's the Lan driver here at Gigabyte http://www.gigabyte.com.tw/Support/M...ProductID=1408

this will only work if your ethernet plug is on the I/O plate - click image to focus http://www.overclockeddoc.com/bookwo...0io%20slot.JPG

Set a System Restore Point before installing just in case
Start / All Programs / Accessories / System Tools / System Restore – click radio button Create a restore point and follow instructions

[blind1062002]

ok i installed the motherboard and went to install the drivers but it said the RPC server is unavailable i have ethernet connected to the i/o plate. so what do i do now?