[quote=PunkyMcPunk]I have tried to read through these threads to do the whole learn from others but I'm a complete computer idiot and don't understand half of anything here. So can someone help me with the apparently quite common error of no sound and an audio multimedia controller missing code 28 thingy..... Here is the stuff you need about my computer.... BUT can you PLEASE give instructions in complete idiot terms for me? Thank you!!!!!
Operating System System Model Windows XP Home Edition Service Pack 2 (build 2600) Enclosure Type: Desktop Processor a Main Circuit Board b 1.50 gigahertz AMD Sempron
128 kilobyte primary memory cache
256 kilobyte secondary memory cache Bus Clock: 166 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 07/07/2004 Drives Memory Modules c,d 291.15 Gigabytes Usable Hard Drive Capacity
280.31 Gigabytes Hard Drive Free Space
HL-DT-ST DVDRAM GSA-4163B [CD-ROM drive]
3.5" format removeable media [Floppy drive]
Maxtor 6E040L0 [Hard drive] (41.11 GB) -- drive 0, s/n E1K2E1WE, rev NAR61590, SMART Status: Healthy
WDC WD2500JB-00REA0 [Hard drive] (250.06 GB) -- drive 1 256 Megabytes Installed Memory
Slot 'A0' has 256 MB
Slot 'A1' is Empty Local Drive Volumes
c: (NTFS on drive 0) 41.10 GB 30.41 GB free
e: (NTFS on drive 1) 250.05 GB 249.89 GB free
HP Deskjet F2100 series on USB001
Controllers Display Standard floppy disk controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
VIA Bus Master IDE Controller NVIDIA GeForce4 MX 4000 (Microsoft Corporation) [Display adapter]
LGE 16.3 [Monitor] (16.3"vis) Bus Adapters Multimedia VIA Rev 5 or later USB Universal Host Controller (3x)
VIA USB Enhanced Host Controller None detected Communications Other Devices SoftV92 Data Fax Modem #2
VIA Rhine II Fast Ethernet Adapter
not showing the make model or motherboard Get Everest / copy and paste the Computer – Summary section. Leave out the Debug –PCI section.
http://www.softpedia.com/get/System/...-Edition.shtml
Linear Mode
