Thermaltake Bigwater SE Cooling system - Need Help!!!!

[raden0887]

Hi I built a new comp recently with the following specs:




MB- GA-KN8-PRO-SLI
CPU - AMD ATHLON X2 +4400, L2 1mbx2, Enhanced Virus Protection
Cooling - Thermaltake Bigwater SE Liquid Cooling System
RAM - CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM DDR 400 (PC 3200) Unbuffered System Memory - TWINX2048-3200C2PRO

VIDEO - 2x XFX PVT42GUAD7 Geforce 6800GS 256MB GDDR3 PCI Express x16 Video Card
DUAL SLI CONFIGURATION

STORAGE - 2x Seagate Barracuda 7200.9 ST3808110AS 80GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
In RAID 0 array for performance

Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
For Media Storage

OPTICAL - IDE MASTER 1 - LG GSA-4167B Black 16x DVDRW-LG-4167B-16xB
IDE MASTER 2 - BENQ 1620 DVD-RW
SAMSUNG Black 1.44MB 3.5" Internal Floppy Drive
Sunbeam SP-BA Black Super Panel with 20-in-1 Card Reader

SOUND - Sound Blaster Audigy 2 ZS Gamer Limited Edition

CASE - ASPIRE X-CRUISE -BK Black Steel ATX Mid Tower Computer Case
POWER SUPPLY - Ultra X-Connect X2 550 Watt ATX 24 Pin Modular Power Supply-- Titanium

ACCESORIES - 2x Internal UV LIGHT, 2 internal 80mm blue led case fans.


First off I would like to add an accessory to the cooling system, the movement tracker.... So how do I drain the fluid without damaging anything or spills?


Second what are there any tweaks I can do to get the most out of the system?

Oh and is there a better way to rearrange the tubes so that the cooling is maximized?


Thank you for all and any help you can give me,


Ilya