|
I've found some further technical specifications on the wireless adapter if that helps at all. See below
Specifications
*
Manufacturer: CastleNet
*
Supported Standards: IEEE 802.11b and IEEE 802.11g
*
Host Interface: Mini PCI TYPE III B
*
Frequency Band: 2.400 ~ 2.4835GHz (subject to local regulations)
*
Spreading: DSSS (Direct Sequence Spread Spectrum)
*
Security:
o
WPA support and Internal engine for 64-bit/128-bit
o
WEP Encryption
*
Operating Range: Open Space: 100 - 400m; Indoor: 30m - 100m
*
Supported Bit Rate: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54Mbps
*
Modulation: OFDM with BPSK, QPSK, 16QAM,64QAM, DBPSK, DQPSK and CCK
*
Antenna: Internal dipole antenna
*
Receiver Sensitivity: 1E-5@-84dBm/11Mbps and -72dBm/54Mbps
*
Power Consumption:
o
TX power consumption <380mA
o
RX power consumption <300mA
*
Transmit Power: 16dBm±1dBm
*
Operation Power: DC 3.3V
*
Roaming: Full mobility and seamless roaming from cell to cell and across Access Point
*
Operating Channels:
o
N. America: 1-11 channels
o
Japan: 1-14 channels
o
Europe (ETSI): 1-13 channels
o
Spain: 10-11 channels
o
France: 10-13 channels
*
Operating Environment
o
Temperature: 0-60. for working;-10-85. for storing
o
Humidity: 5%-95%(non-condensing)
Features
* Up to 54 Mbps data rate
* Full compliance with IEEE802.11g standard
* 802.11i compliant security via hardware support AES-CCMP, WEP/TKIP(64/128/152bits)
* Smart power management for very low power operation, especially in sleep mode
* 802.11e compliant QoS – EDCF, HCF, Contention-free burst and Block-Ack
* Security compliant applications: WPA (Wi-Fi Protected Access) security suite (802.1x)
* Superior equalizer for multipath fading and Doppler effect compensation
* Proprietary co-channel narrow-band interference suppression
I still have no idea if this is LEAP compatible or not, so any help determining that would be greatly appreciated.
Thanks.
|