noob networking question with ethernet wall plug!!!

[distortia]

ok noob question here i have a pc tht is like 200ft away from the switch and i want to wire it cause wireless isnt very good in my house and i wanna use gigabyte network cards!! any way i bought 250ft bulk networking cable and i bought 2 wall plugs for it yo put on either end

my question is where do i put the theads of wire in which place?
the wire has
orange
orange/white
green
green/white
blue
blue/white
brown
brown/white

heres a pic where do i put these threads of wire??

[snowmonkey]

It looks like to need to strip the cable and use the co-ordinated color in the proper socket, basically that's where you have to start.

Basically, Brown and brown/white and Blue and Blue/white are set for straight through setting and the orange and Green are for cross over cable.......furthermore, with two pair cable you will go as fast as 100 MB per second not as fast as your network card (gigabyte)...for gigabyte cabling you need all 4 pairs.

Cheers

[arnett.c]

Really good wiring walk through and wiring diagram. I use it often when I need to make cables or punch outlets as I don't have to do it often.

http://www.swhowto.com/CAT5_Ch1.htm

Good luck