New Gigabyte Ga-ma78gm-s2h Motherboard Prblms Pls Help Me...>

[vinay2008]

HI ALLL...

I HAVE BOUGHT A NEW GIGABYTE MOTHERBOARD GA-MA78GM-S2H IT'S

VERY FEAUTURE RICH AND GOOD OVERCLOCKING FEATURES... AND I HAVE

ASSEMBLED MY SYSTEM AND LOADED WINDOWS XP SP2.... AND I HAVE

INSTALLED ALL THE DRIVERS CAME WITH THE MOTHERBOARD CD... I

HAVE XFX 8600GT 512MB DDR2 CARD . SO THAT I HAVE INSTALLED THE

GRAPHICS DRIVER ALSO... THE I HAVE PLAYED A SONG ON MY PC WITH

WINDOWS MEDIA PLAYER AND WHEN I PRESSED ANY KEY IN THE

KEYBOARD ALONG MOVING THE MOUSE THE MOUSE POINTER SLOWS

DOWN AND THE AUDIO SKIPS EVERYTIME WHEN I PRESSED IN THE

KEYBOARD THIS IS ALSO HAPPENING WHILE TYPING ANYTHING IN THE

NOTEPAD OR ELSEWERE.... SO IF I PLAY ANY GAMES THE SOUND SKIPS

AND ALSO THE FRAMES.... ANY SOLUTION TO THIS PROBLEM..... MY

FRIENDS MOTHERBOARD ALSO THE SAME MODEL I HAVE GA-MA78GM-

S2H9REV(1.0) HE HAS ALSO THE SAME PROBLEMS.. IS THIS IS CAUSING

WITH THE DRIVER ISSUE OR ANYTHING PLEASE HELP ME.......


THEN I HAVE UPDATED FROM ACPI MULTIPROCESSOR PC ADVANCED

CONFIGURATION POWER INTERFACE SO THE PROBLEM GOES BUT I CAN'T

SEE THE TWO CORES ON TASK MANAGER.. ONE ONE CORE IS SEEING

WHAT TO DO... HELP ME PLS....




I HAVE A KINGSTON PENDRIVE HEN I PLUGED IN TO MY USB PORT IT

WORKS GREAT ... IT COPYY ANY DATA FROM PENDRIVE TO HARDDISK BUT

IT CAN'T WRITE TO IT WHEN I COPIED A 100 OR MORE MB DATA TO

PENDRIVE IT HANG AFTER THAT ERROR IS COULDN'T FIND THE PATH AND

WHEN I OPENED THE PENDRIVE IT HAS NO DATA AND I HAVE EJECTED IT

BUT THE LED ON THE PENDRIVE BLINKS.... PENDRIVE IS 4GB KINGSTON

PENDRIVE.... THERE IS NO PROBLEM WITH MY IMATION 2GB PENDRIVE...

BUT THE 4GB KINGSTON PENDRIVE HAS NO PROBLEM IN MY FRIENDS

PC.... AND OTHER PROBLEM IS MY 250GB SEAGATE SATA2 HARDDISK IS

SOME TIME TAKING TO OPEN A FOLDER I HAVE FORMATTED IT LOADED

THE XP NEW BUT THE SAME PROBLEM PERSISTS.... I HAVE CHECKED FOR

BAD SECTORS BUT NO BAD SECTORS.... WHAT'S HAPPENING ON MY

MOTHERBOARD.... IS WITH THE POWERSUPPLY PROBLEMS MY

POWERSUPPLY IS ENTER 400W 12*2 POWERSUPPLY .. IF THIS IS

CAUSING WITH THE PWRSUPPLY PLS RECOMMEND ME A CORRECT

POWERSUPPLY......

[Monty007]

The power supply should be at least a 550 w. Also 1 gig min of ram.

[bookworm]

Go here to Gigabyte and use the Driver scan to check for updates on the drivers http://www.gigabyte.com.tw/Support/M...iver_List.aspx

[Disk_Contented]

Originally Posted by vinay2008

THEN I HAVE UPDATED FROM ACPI MULTIPROCESSOR PC ADVANCED

CONFIGURATION POWER INTERFACE SO THE PROBLEM GOES BUT I CAN'T

SEE THE TWO CORES ON TASK MANAGER.. ONE ONE CORE IS SEEING

WHAT TO DO

You have enabled single CPU hardware layer. Effectively removing a core. You need to return it back the way it was.

Yes, I would look into later drivers: http://tw.giga-byte.com/Support/Moth...ProductID=2758

Bios too, as this addresses some graphic issues in particular:http://tw.giga-byte.com/Support/Moth...ProductID=2758

Disable the onboard video and check windows update for any CPU patches that may exist.

[Ghermination]

Upgrade your power supply, definately sounds like a power issue. Also, only 512 RAM on that nice motherboard? RAM is cheap, buy some more, could fix your problem.