How to connect my wireless connection

[Axel001]

Hi There,

I have a dlink GT604t wireless router. I managed to set up for the LAN connection and all is working fine, but i cannot get the wireless conection working. I have a rt 2500 wireless lan card in my pc which is working becuase it picks up next doors wireless connection. I have enabled the wireless settings on the router but my card is not picking up my router can you give any advice?

CPU Intel® Pentium® 4 540 Prescott (3.2 Ghz)
Memory 512 MB DDR RAM - (2x 256 - PC3200)
Motherboard MS 7046
Hard Drive 250GB Maxtor® MaXLine™ Plus II SATA 7Y250M0
CD / DVD Drive PHILIPS PBDV1640P DVD ReWriter
Floppy Drive Integrated 7 in 1 card reader
TV Card MSI TV-Tuner MS8610
Video / Graphics Card Low profile ATi® Radeon X300SE 128MB PCI-Express x16
Network Card Realtek 8139 Family PCI Fast Ethernet (Onboard)
Network Card Q-COM Z802 802.11g wireless PCI card
Modem C-Com 5619PSV-R
Sound Card Realtek AC'97 audio
Ports PHILIPS-freeline™ LS1100 chassis guide
Remote Receiver Keyboard and mouse remote receiver
Keyboard PHILIPS-freeline™ wireless keyboard
Mouse PHILIPS-freeline™ wireless mouse
Speakers PHILIPS-freeline™ powered stereo speakers

Please help if you can.........Many Thanks

[Monty007]

Check if you have fire wall on. This link might help http://support.microsoft.com/kb/314897
I would also try the router with the secure networking turned off just to see if it makes a difference.

[Kevin_gibson]

I have a dlink GT604t wireless router. I managed to set up for the LAN connection and all is working fine, but i cannot get the wireless conection working. I have a rt 2500 wireless lan card in my pc which is working becuase it picks up next doors wireless connection. I have enabled the wireless settings on the router but my card is not picking up my router can you give any advice?

If it's picking up your neigbours your card is OK, have you got your wireless ID hidden? usually named SSID, check in the router config pages to see how to enable or show the SSID

See the following for info on showing or enabling the SSID.
http://www.cruzio.com/support/docs/router_dlink.html