
05-16-2008, 01:16 PM
|
 |
Sound Queen
|
|
Join Date: Sep 2002
Location: Lancashire England
Posts: 9,707
|
|
Quote:
|
Originally Posted by unearth212
hey unfortunately im back again. I had sound for a while then all of a sudden i get that gray scale of death under the sound options saying that there was no sound device found. I tried reinstalling the driver that you gave me but to no luck. Idk what the problem is: S.O.S.!!!
|
check this out
Start / Control Panel / Administrative Tools / Component Services / a separate window will open – in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot.
__________________
Hope this helps
Barbara MCP
Friends are
Gods apology
for relations.
It's not what you know, it's who you know ( especially the members of the Software Tips&Tricks Forum )
|

05-16-2008, 05:48 PM
|
 |
Sound Queen
|
|
Join Date: Sep 2002
Location: Lancashire England
Posts: 9,707
|
|
Quote:
|
Originally Posted by aacarnahan
Well, it's obvious that I'm not the only one with this problem. I just recently installed Windows XP Pro on my Compaq Presario SR2150NX which came with Vista Basic. After the switch to Pro, I came across the problem that all of you have had. I have searched for hours and have installed the drivers for the video card that is supposedly not there. I may need other drivers, but I can' t find any. My motherboard is an ECS RC415ST-HM. I can't figure out what's wrong with it. None of the drivers do anything for the sound. If you can help it would be much appreciated. If you need anymore information from me just ask.
|
the audio is Realtek High Definition go here http://www.realtek.com.tw/downloads/...Audio%20Codecs
Tick I accept the above – wait till site resets then click Next
Download the (Executable file) save to desktop, double click downloaded file on desktop to install
The site is slow
Set a System Restore Point before installing drivers just in case
Start / All Programs / Accessories / System Tools / System Restore / select Create a restore point and follow instructions
__________________
Hope this helps
Barbara MCP
Friends are
Gods apology
for relations.
It's not what you know, it's who you know ( especially the members of the Software Tips&Tricks Forum )
|

05-16-2008, 06:04 PM
|
 |
Sound Queen
|
|
Join Date: Sep 2002
Location: Lancashire England
Posts: 9,707
|
|
Quote:
|
Originally Posted by unearth212
hey unfortunately im back again. I had sound for a while then all of a sudden i get that gray scale of death under the sound options saying that there was no sound device found. I tried reinstalling the driver that you gave me but to no luck. Idk what the problem is: S.O.S.!!!
|
check this out
Start / Control Panel / Administrative Tools / Component Services / a separate window will open – in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot.
if still no audio check the BIOS - click images to focus
when comp boots press the <Del> key
Main menu opens - http://www.overclockeddoc.com/bookwo...UXE%20Main.JPG
use right arrow key to go to Advanced menu - http://www.overclockeddoc.com/bookwo...20Advanced.JPG
down arrow to Onboard Devices Configuration - http://www.overclockeddoc.com/bookwo...v%20Config.JPG
AC'97 should be [Enabled] if showing [Disabled] use the + key to change
Press F10 key to Save & Exit
y to accept changes
XP will load
install audio driver again
__________________
Hope this helps
Barbara MCP
Friends are
Gods apology
for relations.
It's not what you know, it's who you know ( especially the members of the Software Tips&Tricks Forum )
|

05-16-2008, 09:04 PM
|
|
Registered User
|
|
Join Date: May 2008
Posts: 2
|
|
|
no audio device
I bought a Compaq Presario V6000 laptop with an already installed Windows Vista software. Everything was working fine until i had a virus problem. i reinstalled a Windows XP Professional 2002. Service Pack 2
Unfortunately, for the past several months I have been unable to hear any sounds. Checking ''Sounds, Speech and Audio Devices'' under the Control Panel indicates that there is ''No Audio Device.'' Yet, when I check the hardware tab it states that the ''C-Media AC 97 Audio Device'' is working properly.
Checking other hardware reveals that all other devices (Audio Codecs, Legacy Audio Devicess, and Media Control Devices) are also working properly. i have tried everything but it doenst seem to work.
Heres my laptop details
serial no: CNF73322DB,
P/N: GS627EA#ABB
PRODUCT KEY: PVRMM-GTXF3-R3D6V-93W8H-CXP8Q
sYSTEM SERVICE TAG: V6430en
BIOS: HP-604000O ver 1.00PARTTBL
pROCESSOR: GenuineIntel family 6 Model 14 1.9GHZ Stepping
|

05-17-2008, 06:52 AM
|
 |
Sound Queen
|
|
Join Date: Sep 2002
Location: Lancashire England
Posts: 9,707
|
|
Quote:
|
Originally Posted by kecho
I bought a Compaq Presario V6000 laptop with an already installed Windows Vista software. Everything was working fine until i had a virus problem. i reinstalled a Windows XP Professional 2002. Service Pack 2
Unfortunately, for the past several months I have been unable to hear any sounds. Checking ''Sounds, Speech and Audio Devices'' under the Control Panel indicates that there is ''No Audio Device.'' Yet, when I check the hardware tab it states that the ''C-Media AC 97 Audio Device'' is working properly.
Checking other hardware reveals that all other devices (Audio Codecs, Legacy Audio Devicess, and Media Control Devices) are also working properly. i have tried everything but it doenst seem to work.
Heres my laptop details
serial no: CNF73322DB,
P/N: GS627EA#ABB
PRODUCT KEY: PVRMM-GTXF3-R3D6V-93W8H-CXP8Q
sYSTEM SERVICE TAG: V6430en
BIOS: HP-604000O ver 1.00PARTTBL
pROCESSOR: GenuineIntel family 6 Model 14 1.9GHZ Stepping
|
The model you have appears to be the Presario V6430en, and this has Conexant High Definition audio, but with XP you need the M$ Universal Audio Architecture installing first. Your model does not give XP drivers but this V6000 has the same drivers
http://h10025.www1.hp.com/ewfrf/wc/s... duct=1842078
install the M$ driver first then the Conexant audio driver next
Set a System Restore Point before installing EACH driver just in case
Start / All Programs / Accessories / System Tools / System Restore / select Create a restore point and follow instructions
__________________
Hope this helps
Barbara MCP
Friends are
Gods apology
for relations.
It's not what you know, it's who you know ( especially the members of the Software Tips&Tricks Forum )
|

06-14-2008, 04:47 PM
|
|
Registered User
|
|
Join Date: Jun 2008
Posts: 2
|
|
|
No Audio Device
Quote:
|
Originally Posted by bookworm
That model has Realtek HD audio go here http://www.realtek.com.tw/downloads/...&GetDown=false
Download the (Executable file) save to desktop, double click downloaded file on desktop to install
Set a System Restore Point before installing drivers just in case
Start / All Programs / Accessories / System Tools / System Restore / select Create a restore point and follow instructions
|
Hi bookworm,
wondering if you can help me out. I'm having the same problem as everyone else NO AUDIO DEVICE on computer with an Intel D875PBZ Motherboard
I had installed an digidesign MBOX on my computer and it showed NO AUDIO DEVICE. So I went ahead and reinstalled my M Audio Delta 1010lt sound card back again.
For some reason it's not recognizing it anymore. It says NO AUDIO DEVICE and of course under the default i get "MODEM O Line Record"
So anyones did a lot of research and tried all the steps:
1. I went to manage > services > windows audio> and made sure that it was ON and it was so then
2. So went to the Intel website downloaded the latest drivers for the chipset and went to the M-AUDIO drivers downloaded the latest drivers for my soundcard and still nothing. I even flashed the BIOS with the upgrade from intel.
3. I also tried this other suggestion to replace audiosrv.dll file on windows system 32 and that didn't work either.
4. I also tried doing the whole enumerator thing where u edit the machine.inf fille and i have no idea what i did but that didn't work either.
So i ran out of options here hoping that u can help me out here. Keep in mind I also took the battery off the motherboard to reset the BIOS or whatever that is and still didn't work. I haven't re-imaged my PC though, but from what I've seen from other forums it still doesn't make a difference. any HELP would be greatly appreciated. thanks
|

06-15-2008, 05:53 AM
|
|
Registered User
|
|
Join Date: Jun 2008
Posts: 2
|
|
|
Oops i also forgot to put my computer's info. Here it is
Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name PEE-34E1AFA9E47 (Jose)
User Name jose
Motherboard:
CPU Type Intel Pentium 4, 3000 MHz (15 x 200)
Motherboard Name Intel Bonanza D875PBZ (5 PCI, 1 AGP, 4 DIMM, LAN)
Motherboard Chipset Intel Canterwood i875P
System Memory 2048 MB (DDR SDRAM)
BIOS Type AMI (03/31/05)
Communication Port Communications Port (COM1)
Communication Port Printer Port (LPT1)
Display:
Video Adapter RADEON 9200 LE Family (Microsoft Corporation) (128 MB)
Video Adapter RADEON 9200 LE SEC Family (Microsoft Corporation) (128 MB)
3D Accelerator ATI Radeon 9200 (RV280)
Monitor Plug and Play Monitor [NoDB] (QC6070374021)
Multimedia:
Audio Adapter IC Ensemble ICE1712 Envy24 Audio Controller
Storage:
IDE Controller Intel(R) 82801EB Ultra ATA Storage Controllers
IDE Controller Intel(R) 82801EB Ultra ATA Storage Controllers
SCSI/RAID Controller MagicISO SCSI Host Controller
Floppy Drive Floppy disk drive
Disk Drive ST3160023A (160 GB, 7200 RPM, Ultra-ATA/100)
Disk Drive EPSON USB Mass Storage USB Device
Optical Drive MagicISO Virtual DVD-ROM0000
Optical Drive PLEXTOR DVDR PX-716A (DVD+R9:6x, DVD+RW:16x/8x, DVD-RW:16x/4x, DVD-ROM:16x, CD:48x/24x/48x DVD+RW/DVD-RW)
SMART Hard Disks Status OK
Partitions:
C: (NTFS) 152617 MB (47233 MB free)
Input:
Keyboard Microsoft USB Natural Ergonomic Keyboard 4000 (IntelliType Pro)
Mouse Microsoft USB Wheel Mouse Optical
Network:
Network Adapter Intel(R) PRO/1000 CT Network Connection
Network Adapter Nortel IPSECSHM Adapter - Packet Scheduler Miniport
Network Adapter WPN311 RangeMax(TM) Wireless PCI Adapter (10.0.0.2)
Peripherals:
Printer EPSON Stylus CX7000F Series
Printer Microsoft Office Document Image Writer
USB1 Controller Intel 82801EB ICH5 - USB Controller [A-2/A-3]
USB1 Controller Intel 82801EB ICH5 - USB Controller [A-2/A-3]
USB1 Controller Intel 82801EB ICH5 - USB Controller [A-2/A-3]
USB1 Controller Intel 82801EB ICH5 - USB Controller [A-2/A-3]
USB2 Controller Intel 82801EB ICH5 - Enhanced USB2 Controller [A-2/A-3]
USB Device EPSON CX6900F/CX7000F/DX7000F
USB Device Microsoft USB Wheel Mouse Optical
USB Device USB Composite Device
USB Device USB Composite Device
USB Device USB Human Interface Device
USB Device USB Human Interface Device
USB Device USB Mass Storage Device
USB Device USB Printing Support
|

06-15-2008, 08:11 PM
|
 |
Sound Queen
|
|
Join Date: Sep 2002
Location: Lancashire England
Posts: 9,707
|
|
Quote:
|
Originally Posted by dorkyguy76
Hi bookworm,
wondering if you can help me out. I'm having the same problem as everyone else NO AUDIO DEVICE on computer with an Intel D875PBZ Motherboard
I had installed an digidesign MBOX on my computer and it showed NO AUDIO DEVICE. So I went ahead and reinstalled my M Audio Delta 1010lt sound card back again.
For some reason it's not recognizing it anymore. It says NO AUDIO DEVICE and of course under the default i get "MODEM O Line Record"
So anyones did a lot of research and tried all the steps:
1. I went to manage > services > windows audio> and made sure that it was ON and it was so then
2. So went to the Intel website downloaded the latest drivers for the chipset and went to the M-AUDIO drivers downloaded the latest drivers for my soundcard and still nothing. I even flashed the BIOS with the upgrade from intel.
3. I also tried this other suggestion to replace audiosrv.dll file on windows system 32 and that didn't work either.
4. I also tried doing the whole enumerator thing where u edit the machine.inf fille and i have no idea what i did but that didn't work either.
So i ran out of options here hoping that u can help me out here. Keep in mind I also took the battery off the motherboard to reset the BIOS or whatever that is and still didn't work. I haven't re-imaged my PC though, but from what I've seen from other forums it still doesn't make a difference. any HELP would be greatly appreciated. thanks
|
is this your audio card
http://www.overclockeddoc.com/bookwo...0envy%2024.JPG
__________________
Hope this helps
Barbara MCP
Friends are
Gods apology
for relations.
It's not what you know, it's who you know ( especially the members of the Software Tips&Tricks Forum )
|

07-07-2008, 01:27 PM
|
|
Registered User
|
|
Join Date: Jul 2008
Posts: 15
|
|
|
No Audio Device
I have had a no audio device condition since Jan 11, when i had to do a restore.I have an HP Pavilion desktop with a 2.70 gigahertz processor and 760 mg of memory.
The main circuit board is a MSI Gamila/Giovani/Neon series 030.
The Motherboard Chipset is an Intel Brookdale-G i845GEV
I am running Windows XP Home Edition SP3, v.3311
It has a Realtek AC'97 Audio device. I have loaded the drivers for this several times to no avail. I have tried the Sound Blaster card, but that didn't work either. Same result so I restored the Realtek.
I don't have a Windows disk, just an area on my hard drive, that theoretically contains the system.
All of the devices claim: 'Device is working properly'
This machine is very fast, at least for me, and I hate to spend over $600 just because of the sound.
Can anyone help with this? I too, am getting very depressed about this.
Thanks
Russ
|

07-07-2008, 02:30 PM
|
|
Registered User
|
|
Join Date: Jul 2008
Posts: 15
|
|
Quote:
|
Originally Posted by rrs18
I have had a no audio device condition since Jan 11, when i had to do a restore.I have an HP Pavilion desktop with a 2.70 gigahertz processor and 760 mg of memory.
The main circuit board is a MSI Gamila/Giovani/Neon series 030.
The Motherboard Chipset is an Intel Brookdale-G i845GEV
I am running Windows XP Home Edition SP3, v.3311
It has a Realtek AC'97 Audio device. I have loaded the drivers for this several times to no avail. I have tried the Sound Blaster card, but that didn't work either. Same result so I restored the Realtek.
I don't have a Windows disk, just an area on my hard drive, that theoretically contains the system.
All of the devices claim: 'Device is working properly'
This machine is very fast, at least for me, and I hate to spend over $600 just because of the sound.
Can anyone help with this? I too, am getting very depressed about this.
Thanks Russ
|
Some more info from the Device Manager:
Audio Codecs
Legacy Audio Drivers
Legacy Audio Drivers
Legacy Video Capture Devices
Media Control Devices
RealTek AC'97 Audio
Video Codecs
All of the above are 'Working Properly' except that there is no sound. 
|

07-08-2008, 07:53 AM
|
|
Registered User
|
|
Join Date: Jul 2008
Posts: 15
|
|
|
I have also used "Driver Agent" and it reported that all was ok.
Thanks
|

07-08-2008, 02:59 PM
|
 |
Sound Queen
|
|
Join Date: Sep 2002
Location: Lancashire England
Posts: 9,707
|
|
Quote:
|
Originally Posted by rrs18
I have had a no audio device condition since Jan 11, when i had to do a restore.I have an HP Pavilion desktop with a 2.70 gigahertz processor and 760 mg of memory.
The main circuit board is a MSI Gamila/Giovani/Neon series 030.
The Motherboard Chipset is an Intel Brookdale-G i845GEV
I am running Windows XP Home Edition SP3, v.3311
It has a Realtek AC'97 Audio device. I have loaded the drivers for this several times to no avail. I have tried the Sound Blaster card, but that didn't work either. Same result so I restored the Realtek.
I don't have a Windows disk, just an area on my hard drive, that theoretically contains the system.
All of the devices claim: 'Device is working properly'
This machine is very fast, at least for me, and I hate to spend over $600 just because of the sound.
Can anyone help with this? I too, am getting very depressed about this.
Thanks
Russ
|
which HP model do you have, all those boards have Realtek onboard sound, but do you have a sound card installed. Get Belarc, copy and paste the report, omit the Software section, it gives Product Codes for your OS and the Windows Critical Updates.
http://www.belarc.com/free_download.html
check this
Check Control Panel/ Sound & Audio Devices/ Audio tab/ Sound Playback click on down arrow and check that the correct audio is selected. Typically the problem will be they something like "modem line 0 playback" might have been substituted for the proper audio device.
Start / Control Panel / Administrative Tools / Component Services / a separate window will open – in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot
__________________
Hope this helps
Barbara MCP
Friends are
Gods apology
for relations.
It's not what you know, it's who you know ( especially the members of the Software Tips&Tricks Forum )
|

07-08-2008, 05:38 PM
|
|
Registered User
|
|
Join Date: Jul 2008
Posts: 15
|
|
|
No Audio Device
HI, and thanks for helping. This is the Belarc summary. I have performed the steps you described above. In the first, there is just no "Sound Playback" tab. I am stuck there. In the second, the start-up type is "automatic". Nothing to do there.
I have spent my whole life in tech support for mainframes, and this is very frustrating. I know it is not hardware, but my hands are tied.
Under system devices, for system speaker, it says "no drivers installed". But if i try and install one, it says i have the most current.
Any help, please,,
Thanks
Russ
Computer Profile Summary
Computer Name: Your-fsyly0jtwn (in WORKGROUP)
Profile Date: Tuesday, July 08, 2008 6:34:36 PM
Advisor Version: 7.2x
Windows Logon: Owner
Click here for Belarc's System Management products, for large and small companies.
Operating System System Model
Windows XP Home Edition Service Pack 3, v.3311 (build 2600) HP Pavilion 061 DQ173A-ABA A400N 0n81211RE101GAMIL10
System Serial Number: MXK4060YGZ NA400
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.70 gigahertz Intel Celeron
8 kilobyte primary memory cache
128 kilobyte secondary memory cache Board: MICRO-STAR INTERNATIONAL CO., LTD Gamila/Giovani/Neon series 030
Serial Number: 3B12173571
Bus Clock: 100 megahertz
BIOS: Phoenix Technologies, LTD 3.05 11/25/2003
Drives Memory Modules c,d
80.00 Gigabytes Usable Hard Drive Capacity
59.48 Gigabytes Hard Drive Free Space
IDE-DVD ROM 16x [CD-ROM drive]
Memorex 52MAXX 3252AJ1v2 [CD-ROM drive]
3.5" format removeable media [Floppy drive]
Generic USB CF Reader USB Device [Hard drive] -- drive 2
Generic USB MS Reader USB Device [Hard drive] -- drive 4
Generic USB SD Reader USB Device [Hard drive] -- drive 1
Generic USB SM Reader USB Device [Hard drive] -- drive 3
ST380011A [Hard drive] (80.03 GB) -- drive 0, s/n 5JV4NTFP, rev 3.06, SMART Status: Healthy 760 Megabytes Installed Memory
Slot 'A0' has 512 MB
Slot 'A1' has 256 MB
Local Drive Volumes
c: (NTFS on drive 0) 74.09 GB 58.47 GB free
d: (FAT32 on drive 0) 5.91 GB 1.02 GB free
Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
Owner 7/8/2008 1:56:10 PM (admin)
local system accounts
Administrator never (admin)
ASPNET never
Guest never
HelpAssistant never
SUPPORT_388945a0 never
SUPPORT_fddfa904 never
DISABLED Marks a disabled account; LOCKED OUT Marks a locked account
Amyuni Document Converter 2.10 on LPT1:
Canon PIXMA iP4000 on USB001
Microsoft Shared Fax Driver on SHRFAX:
Controllers Display
Standard floppy disk controller
Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller] Intel(R) 82845G/GL/GE/PE/GV Graphics Controller [Display adapter]
HP D7382A LCD [Monitor] (14.9"vis, s/n TT92801303, July 1999)
Bus Adapters Multimedia
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
Intel(R) 82801DB/DBM USB2 Enhanced Host Controller - 24CD Realtek AC'97 Audio
Communications Other Devices
Agere Win Modem
1394 Net Adapter
Realtek RTL8139/810x Family Fast Ethernet NIC
primary Auto IP Address: 71.98.195.191 / 24
Gateway: 71.98.195.1
Dhcp Server: 71.98.195.1
Physical Address: 00:0C:76:9D:E1:5E
Networking Dns Servers: 68.238.112.12
68.238.96.12
VIA OHCI Compliant IEEE 1394 Host Controller
Logitech Driver Interface (3x)
HID-compliant consumer control device
USB Human Interface Device (2x)
Visioneer OneTouch 8700 USB
Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro)
Logitech HID-compliant Cordless Mouse
USB Composite Device
USB Mass Storage Device
USB Printing Support
USB Root Hub (4x)
Virus Protection [Back to Top]
No details available
Missing Microsoft Security Hotfixes [Back to Top]
These required security hotfixes (using the 06/10/2008 Microsoft Security Bulletin Summary) were not found installed. Note: CIS benchmarks require that Critical and Important severity security hotfixes must be installed.
Q950760 - Moderate (details...)
Q950762 - Important (details...)
Q951376 - Critical (details...)
Q951698 - Critical (details...)
Last edited by rrs18 : 07-08-2008 at 05:46 PM.
|

07-08-2008, 06:50 PM
|
 |
Sound Queen
|
|
Join Date: Sep 2002
Location: Lancashire England
Posts: 9,707
|
|
Quote:
|
Originally Posted by rrs18
HI, and thanks for helping. This is the Belarc summary. I have performed the steps you described above. In the first, there is just no "Sound Playback" tab. I am stuck there. In the second, the start-up type is "automatic". Nothing to do there.
I have spent my whole life in tech support for mainframes, and this is very frustrating. I know it is not hardware, but my hands are tied.
Under system devices, for system speaker, it says "no drivers installed". But if i try and install one, it says i have the most current.
Any help, please,,
Thanks
Russ
Computer Profile Summary
Computer Name: Your-fsyly0jtwn (in WORKGROUP)
Profile Date: Tuesday, July 08, 2008 6:34:36 PM
Advisor Version: 7.2x
Windows Logon: Owner
Click here for Belarc's System Management products, for large and small companies.
Operating System System Model
Windows XP Home Edition Service Pack 3, v.3311 (build 2600) HP Pavilion 061 DQ173A-ABA A400N 0n81211RE101GAMIL10
System Serial Number: MXK4060YGZ NA400
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.70 gigahertz Intel Celeron
8 kilobyte primary memory cache
128 kilobyte secondary memory cache Board: MICRO-STAR INTERNATIONAL CO., LTD Gamila/Giovani/Neon series 030
Serial Number: 3B12173571
Bus Clock: 100 megahertz
BIOS: Phoenix Technologies, LTD 3.05 11/25/2003
Drives Memory Modules c,d
80.00 Gigabytes Usable Hard Drive Capacity
59.48 Gigabytes Hard Drive Free Space
IDE-DVD ROM 16x [CD-ROM drive]
Memorex 52MAXX 3252AJ1v2 [CD-ROM drive]
3.5" format removeable media [Floppy drive]
Generic USB CF Reader USB Device [Hard drive] -- drive 2
Generic USB MS Reader USB Device [Hard drive] -- drive 4
Generic USB SD Reader USB Device [Hard drive] -- drive 1
Generic USB SM Reader USB Device [Hard drive] -- drive 3
ST380011A [Hard drive] (80.03 GB) -- drive 0, s/n 5JV4NTFP, rev 3.06, SMART Status: Healthy 760 Megabytes Installed Memory
Slot 'A0' has 512 MB
Slot 'A1' has 256 MB
Local Drive Volumes
c: (NTFS on drive 0) 74.09 GB 58.47 GB free
d: (FAT32 on drive 0) 5.91 GB 1.02 GB free
Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
Owner 7/8/2008 1:56:10 PM (admin)
local system accounts
Administrator never (admin)
ASPNET never
Guest never
HelpAssistant never
SUPPORT_388945a0 never
SUPPORT_fddfa904 never
DISABLED Marks a disabled account; LOCKED OUT Marks a locked account
Amyuni Document Converter 2.10 on LPT1:
Canon PIXMA iP4000 on USB001
Microsoft Shared Fax Driver on SHRFAX:
Controllers Display
Standard floppy disk controller
Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller] Intel(R) 82845G/GL/GE/PE/GV Graphics Controller [Display adapter]
HP D7382A LCD [Monitor] (14.9"vis, s/n TT92801303, July 1999)
Bus Adapters Multimedia
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
Intel(R) 82801DB/DBM USB2 Enhanced Host Controller - 24CD Realtek AC'97 Audio
Communications Other Devices
Agere Win Modem
1394 Net Adapter
Realtek RTL8139/810x Family Fast Ethernet NIC
primary Auto IP Address: 71.98.195.191 / 24
Gateway: 71.98.195.1
Dhcp Server: 71.98.195.1
Physical Address: 00:0C:76:9D:E1:5E
Networking Dns Servers: 68.238.112.12
68.238.96.12
VIA OHCI Compliant IEEE 1394 Host Controller
Logitech Driver Interface (3x)
HID-compliant consumer control device
USB Human Interface Device (2x)
Visioneer OneTouch 8700 USB
Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro)
Logitech HID-compliant Cordless Mouse
USB Composite Device
USB Mass Storage Device
USB Printing Support
USB Root Hub (4x)
Virus Protection [Back to Top]
No details available
Missing Microsoft Security Hotfixes [Back to Top]
These required security hotfixes (using the 06/10/2008 Microsoft Security Bulletin Summary) were not found installed. Note: CIS benchmarks require that Critical and Important severity security hotfixes must be installed.
Q950760 - Moderate (details...)
Q950762 - Important (details...)
Q951376 - Critical (details...)
Q951698 - Critical (details...)
|
go here to HP, under Original drivers - install the chipset - then Restart comp, try the audio driver http://h10025.www1.hp.com/ewfrf/wc/s...1 284&lang=en
if still no sound check this out, Step 7 to see if audio enabled in the BIOS
http://h10025.www1.hp.com/ewfrf/wc/d...cname=bph07154
if you have a XP disc
Try a System File Check go to Run – type “sfc /scannow” (without the quotes and note space after sfc) have Win disc available in case sfc needs to replace or repair any files. The program runs with no alerts and then closes.
Set a System Restore Point before installing drivers just in case
Start / All Programs / Accessories / System Tools / System Restore / select Create a Restore point and follow instructions
__________________
Hope this helps
Barbara MCP
Friends are
Gods apology
for relations.
It's not what you know, it's who you know ( especially the members of the Software Tips&Tricks Forum )
|

07-09-2008, 10:43 AM
|
|
Registered User
|
|
Join Date: Jul 2008
Posts: 15
|
|
|
No Audio Device
[quote=bookworm]
1. Go here to HP, under Original drivers - install the chipset - then Restart comp, try the audio driver http://h10025.www1.hp.com/ewfrf/wc/s...1 284&lang=en
2. If still no sound check this out, Step 7 to see if audio enabled in the BIOS: http://h10025.www1.hp.com/ewfrf/wc/d...cname=bph07154
3. Iif you have a XP disc, Try a System File Check go to Run – type “sfc /scannow” (without the quotes and note space after sfc) have Win disc available in case sfc needs to replace or repair any files. The program runs with no alerts and then closes.
Hi
I did step 1 and still no sound. I did step 2 and it was marked automatic, so i changed it to enable. Didn't work, so changed it to disable. Did all of step 7 and 8. Still no luck.
I do not have an XP disc, just an area on a D drive that is meaningless to me.
But I ran sfc and it found nothing.
Back to square 1.
Can a person buy a new motherboard? I have tried a different soundboard (SoundBlaster) with the same lousy results.
Maybe I'm gettinng too old for this stuff.
Thanks
Russ.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
| |