[quote=kob420]i just reformated my comp and i have no sounds i was wondering if some1 could help me heres im info
Operating System System Model
Windows XP Home Edition Service Pack 2 (build 2600) Enclosure Type: Desktop
Processor a Main Circuit Board b
2.80 gigahertz Intel Pentium D
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache Board: Foxconn RC4107MA-S2
Serial Number: UY2F62401594
Bus Clock: 200 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 12/23/2005
Drives Memory Modules c,d
330.06 Gigabytes Usable Hard Drive Capacity
318.40 Gigabytes Hard Drive Free Space
HL-DT-ST DVDRAM GSA-H10N [CD-ROM drive]
3.5" format removeable media [Floppy drive]
3.5" format removeable media [Floppy drive]
WDC WD2500AAJB-00WGA0 [Hard drive] (250.06 GB) -- drive 1
WDC WD800JD-00LSA0 [Hard drive] (80.02 GB) -- drive 0 1536 Megabytes Installed Memory
Slot 'A0' has 1024 MB
Slot 'A1' has 512 MB
Slot 'A2' is Empty
Slot 'A3' is Empty
Local Drive Volumes
c: (NTFS on drive 0) 80.02 GB 73.38 GB free
d: (NTFS on drive 1) 250.05 GB 245.02 GB free
Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
matt 6/23/2008 1:35:32 AM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account None detected
Controllers Display
Standard floppy disk controller
Primary IDE Channel [Controller] (3x)
Secondary IDE Channel [Controller] (3x)
Standard Dual Channel PCI IDE Controller (3x) NVIDIA GeForce 8600 GT [Display adapter]
Digital Equipment 15.7 [Monitor] (15.7"vis, June 1997)
Bus Adapters Multimedia
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller (2x) None detected
Communications Other Devices
Realtek RTL8139/810x Family Fast Ethernet NIC
Dhcp Server: none responded
go here to Foxconn
http://www.foxconnchannel.com/suppor...D=en-us0000004
motherboard
Socket 775
RC4107MA-RS2
Set a System Restore Point before installing drivers just in case
Start instructions / All Programs / Accessories / System Tools / System Restore / select Create a Restore point and follow