Categories




Still have a problem? Ask for help at our discussion forum.
Search


Advanced Search
Article Options
Popular Articles
  1. Handwrite for MSN Messenger
  2. Win2000 Logon Screen
  3. The difference between 64 and 32 bit processors
  4. Windows XP FAQ T
  5. Windows XP FAQ P
No popular articles found.

 »  Home  »  System Performance Page 1  »  Stop Jerkey Graphics
Stop Jerkey Graphics
By  Super Admin  | Published  02/24/2005 | System Performance Page 1 | Unrated
Stop Jerkey Graphics

The cpu load would pulse from 1-2% up to 10-12%-load with about three-five seconds intervals...(in idle)
The jerking has not been due to low perfomance hardware or old drivers and I have had the problems on two seperate systems.
If you are connected to a LAN and have similar problems, this might be the solution:

1.RightClick "MyComputer"
2.Select "Manage"
3.Click on "Device Manager"
4.DoubleClick on your NIC under "Network Adapters"
5.In the new window, select the "Advanced" tab
6.Select "Connection Type" and manuelly set the value of your NIC. (Not "Auto Sense" which is default.)
7.You should reboot...
On my systems the "jerking" in 3D games was completly gone, and so was the high idle cpu load.

How would you rate the quality of this article?
1 2 3 4 5
Poor Excellent
Tell us why you rated this way (optional):

Send to Author Post on Site

Comments
  • Comment #1 (Posted by an unknown user)
    Rating
    Users need to watch this setting carefully. If You have the "Auto-Sense" deactivated, it can "throttle" Your internet connection, causing it to slow down, or barely even appear.
     
Submit Comment