Categories




Still have a problem? Ask for help at our discussion forum.
Search


Advanced Search
Article Options
Popular Articles
  1. Handwrite for MSN Messenger
  2. Win2000 Logon Screen
  3. The difference between 64 and 32 bit processors
  4. Windows XP FAQ T
  5. Windows XP FAQ P
No popular articles found.

 »  Home  »  Internet  »  Make mIRC identd work
Make mIRC identd work
By  Super Admin  | Published  02/24/2005 | Internet | Rating:
Make mIRC identd work

This is due to the built in "Internet Connection Firewall" in XP. Here is how to get it working without disabling the entire firewall:

1. Go into Control Panel-> Network Connections
2. Right click "Local Area Network" and select "Properties"
3. Left click the advanced tab
4. Left click the settings button
5. Under services, left click the add button
6. For description type "Ident", for Name of IP put the name that identifies your system with your ISP OR your IP if it is static.
7. Both external and internal ports are 113 by default and TCP.
8. Click OK all the way out.

No reboot is needed and the Identd function now goes through without a hitch. This should work for any programs that use port 113 for Identd. Enjoy your chatting again!

How would you rate the quality of this article?
1 2 3 4 5
Poor Excellent
Tell us why you rated this way (optional):

Send to Author Post on Site

Comments
  • Comment #1 (Posted by an unknown user)
    Rating
    Man this was so dman good, I didn't really know what I was doing and it still worked! thanks a million.
     
  • Comment #2 (Posted by an unknown user)
    Rating
    If you have a router, don't forget to open the port there too ..
     
  • Comment #3 (Posted by an unknown user)
    Rating
    this is garbage doesn't work I enabled ports 113 in mIRC's ident & I did the instructions above + I enabled in my router's config site.
     
Submit Comment